D-Ring Tool Shackles - Fall Protection

Tool Shackle (2-Pack) installs onto the midsection of waisted/necked tools like spud wrenches, combination wrenches and hammers, to create a retrofit attachment point for tethering tools up to 15lb // 6.8kg, preventing dropped or falling objects from occurring on the job.

The Squids 3790 Tool Shackle (2-Pack) installs onto the midsection of waisted/necked tools like spud wrenches, combination wrenches and hammers, to create a retrofit attachment point for tethering tools up to 15lb // 6.8kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools with small or no captive holes. While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.</p>

STRAIGHTFORWARD INSTALLATION</h3>

To install, unscrew the crossbar and slide the U-shaped shackle around the neck or waist of the hand tool. Apply thread adhesive to the threads of the crossbar and reconnect, using a pair of pliers to firmly tighten the crossbar. Built with strong stainless steel, this tool shackle is durable and will not corrode in extreme environments.</p>

TESTED TO BE TRUSTED</h3>

These tool tether attachments are built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. These attachments are third-party certified to 15lb // 6.8kg maximum capacity and meet the ANSI/ISEA 121-2018 standard with all required labeling.</p>

Ideal for those tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk.</p>

Four sizes of tool shackles are compatible on tools with diameters ranging from 0.40in // 10mm to 0.80in // 20mm. Reference the size chart for specific ranges per size.</p>

D-Ring Tool Shackles - Fall Protection

DSJ-3015 Outdoor Climb Fall Protection D-Ring, Forged Steel Safety Belt D- Ring - Dawson Group Ltd. - China Manufacturer, Supplier, Factory

Shackle, 5/32 (4mm) Pin D

Snug Cottage Hardware D Shackle

Lashing Ring Weld On 1'' x 47,000 Lbs Forged Mounting Ring [FH2141] - Lashing Ring Weld On 1'' x 47,000 Lbs Forged Ring. This is a heavy duty 1

D Rings for Trailers - Forged Rings - Weld On D Ring - Weld On Ring

Guardian Fall Protection 6 ft. Shock Absorbing Lanyard 01220 - The Home Depot

Complete Suite: 2Pcs Red Shackle Isolators & 8 Pcs Thick & Thin Washers Kit Fit For 3/4 Inch D-Ring or Bow Shackle with 7/8 Inch Screw Pin and

AUTMATCH D Ring Shackle Isolators Washers Kit - 2 Rubber Shackle Isolators with 8 Washers, Fits 3/4 Shackles Protect and Prevents Rattling, Shackle

316 Stainless Steel Standard D Shackles by DuraBrite - Rigging & Marine

PREMIUM QUALITY: 3/4'' d ring shackle is made of heavy-duty drop-forged steel with an industry-standard 7/8 screw pin to keep its stability. Ideal

D-Ring Shackle 3/4 2 Pack Clevis Shackles Rugged 19 Ton (41,890 lbs) Break Strength with 7/8 Screw Pin and Shackle Isolator & Washers for Off-Road

Dee Shackle - Screw Pin - WH Scott & Son Engineers

D-Ring Tool Shackles - Fall Protection